**SALE - Limited Quantities**
****
SNOW GOOSE FLAPPING FLYER DECOYS
by Sillosocks Decoys
These Snow Goose Flapping Flyer Decoys by Sillosock Decoys represent a new dimension in decoying waterfowl. The unique wing flapping movement attacts attention that can be seen for miles. The geese can hardly resist coming over and taking a look. Choose from our regular printed bag or the new FULLY FLOCKED Model.(SS1111FF)
These Snow Goose Flapping Flyer Decoys by Sillosocks Decoys have produced fabulous hunts in the last 5 years. Not only can the flapping motion be seen for miles, they also finish birds. Our average shot is 25 yards on snow geese. We generally use 3 Flyers around each hunter for concealment purposes and spread the rest of the flyers thoughout the rig. Pound for pound, dollar for dollar, these flyers will do more for you than any other decoy out there. They are by far, the best money spent in the spread.
Use these Snow Goose Flapping Flyer Decoys SS1111 by Sillosocks Decoys, one time, and you'll feel lost without them.
On Bluebird windless days, we put the flyers on Sillosock Rotary machines and have some tremendous results. The mallards and snow geese were absolutely keying on the movement.
I personally think this Snow Goose Flapping Flyer Decoy SS1111 by Sillosocks Decoys is one of the best new products to come down the pike in years. They are quiet, rugged, and do not shine. Designed to be used on a "Vortex/Rotary machine" or a 1/4" steel or fiberglass rod.(not included)...Patent Pending.
In high winds, put them low to the ground on 6" stakes. In low-medium winds, we put them on 3-9 foot tall rods.
Also, great for use on a Rotary Machine, the Sidewinder machine, The Hammer Machine, or the Son of Stalker.
The Double Down Wind activated device is also a good way to use the Flapping decoys.
Combine with a "Flagging Bracket" for use on our new 12' telescopic Flagging pole. This pole comes with a flagging bracket which allows the flyer to pivot(stay level) as you raise and lower the pole.
These Snow Goose Flapping Flyers come with a 3' Fiberglass ground rods. The new nosepiece design comes with a thumbscrew.
For use on a rotary machine, I like to move the nosepiece to the chest. This locks it down solid so it cannot pivot as it goes round and round.
The same design is utilized on the "SIDEWINDER" by Sillosocks. This machine simulates geese that are "hopping" over each other while feeding. We have had great success with 3-4 machines running at the upwind side of the spread. The Sidewinder or Son of Stalkers work best when you have enough wind to make the flyers "flap". Mix in a more flyers on grond rods around the machines for a great look.
Each Sillosock Snow Goose Flapping Flyer comes with a 3 foot two piece fiberglass rod. (addional fiberglass rods and couplers available.)
